BPI-2 is used to analyze the corrosion destruction rate of metallic buried constructions and to define the efficiency of an electrochemical protection station. Total corrosion and its average rate are assessed through regular control of conductivity of sensor plates with different width. EHZ-CENTER offers to buy Sensor Plates to control corrosion rate at the best price.
Design and Features
BPI-2 has three plates of 0.3, 0.4, 0.5 mm in depth and 2 mm in width joined with one general plate (1.5 millimeter in depth). A conductor is connected to each of them. The device is enclosed in a nylon body. The product has several configurations depending on operating environment and its purpose, therefore the price for BPI-2 varies.
Characteristics:
- the device is for one use only, it is not repairable during its exploitation;
- the device can be used together with ENES-1 and similar reference electrodes;
- the device is suitable to be used as a potential sensor;
- plate width determines the color of the output cables.
The device can be used at –40°С – +100°С, relative soil humidity can be up to 100% at 35°С.
Installation
BPI-2 is mounted on the surface of the protected facility with the sensors out and is fixed by the ears at the side of the device body with a supplied rubber strap. The device can also be mounted on the reference electrode bodies. Conductors from the device, pipeline and reference electrode (if any) are connected to the terminal box in a false manhole (in a metal body at the construction wall, in a measuring station or in the electrochemical protection device body).
To Buy on Favorable Terms
EHZ-CENTER can provide you with the favorable terms. The products are certified and accompanied with necessary approvals. Company’s experts consult you on the product range, payment and delivery terms.
Contact us in any convenient way to request and to check the prices for Sensor Plates BPI-2. You can fill in a request form on-line or call us by phone.
Прямое оценивание опасности коррозии посредством БПИ-2 осуществляется как при отсутствии, так и при наличии ЭХЗ на контролируемых участках сооружений и конструкций. При контроле функционирования средств ЭХЗ блок БПИ-2 размещают в местах дренажа установок защиты катодной и дренажной. При определении скорости развития коррозии на трубопроводах устройства прикрепляют на поверхность труб в зонах наименьших защитных потенциалов.
- Перед установкой БПИ-2 поверхности индикаторов обезжиривают, измеряют сопротивление между пластинами-индикаторами и общей пластиной (норма —10 Ом и меньше).
- Блок пластин-индикаторов БПИ-2 отдельной поставки устанавливают на подземное сооружение или теплоизоляционную конструкцию панелью наружу. С помощью проушин блока его прикрепляют к контролируемому оборудованию.
- БПИ-2 может поставляться комплектно с электродами сравнения ЭНЕС-1/-1МС/-3М. Блок БПИ-2, укрепленный на корпусе электрода, играет роль датчика потенциала.
- Проводники от трубопровода, БПИ, электрода подсоединяют к клеммнику, который размещается в фальш-колодце, контрольно-измерительном пункте, на стене здания в корпусе из металла или в станции катодной защиты.
You are welcome to attach any draft documents (a project), if any, to your request.