Grounding Anodes (underground) is used for cathodic protection of main gas, oil pipelines, ground and underground reservoirs of oil products, gas, and water, underground cables, pile structures, wells, casing columns, system grounding of electric transmission lines and other metallic structures contacting soil and water.
Ferrosilid Alloy Grounding Anodes work in any soil, they are resistant to anode dissolution in an aggressive alkali or acidic soils, in salty and fresh water.
Ferrosilid Grounding Anodes ELZhK, АZZhK are used as a low soluble elements in cathodic protection systems against corrosion in pipelines and other metallic structures buried underground.
They work together with the cathodic protection converters in any soils. They are located below the soil freezing depth mark with the ambient temperature from 0 to +60ºС.
ELZhK Features
ELZhK Grounding Anode are manufactured on the basis of round and x-shaped section ferrosilid electrodes casted from iron silicon alloy with alloyed chrome, molybdenum, titanium and other elements.
Nominal current load is 1.5 — 2.0 А. Electrode dissolution rate with nominal load is max 0.3 kg* А/year. Connecting VVP cable or similar type cable has 6 mm section copper cores and more. Contacting area of the cable with the electrode is lowered into a casting body and insulated with a compound and with a heat shrink sleeve outside (or a cap, or a tube).
Main Features of AZZhK
Ferro-Silicate Grounding Anode АZZhk has the nominal current load of 4 A, electrode ferrosilid dissolution rate with the maximum current load and average operating conditions is 0.3 kg*А/ year. Service life is min. 30 years minus the supplied cable service life. EHZ-CENTER offers Grounding Anodes ELZhK and АZZhK.
Delivery period is one week.
A guide price for the Grounding Anodes ELZhK, АZZhK is from ₽ 3,980. Check the price and leave your request at 8-800-250-11-83 or send a request at
exportehz@gmail.com.
Заземлители АЗЖК глубинной установки работают в комплекте с преобразователем катодной защиты и размещаются ниже отметки глубины промерзания почвы. Заземлитель типа «упакованный» состоит из помещенного в металлический футляр железокремнистого электрода. Пространство между электродом и корпусом заполняется при изготовлении активатором. Из каждого блока заземлителя выведен кабель длиной 2 м. Заземлители могут соединяться в гирлянду.
- Перед монтажом качество изоляции заземлителя рекомендуется проверить дефектоскопом.
- Обязательно сразу после бурения скважины устанавливают в неё устройство.
- После завершения монтажа скважина заполняется нижней и верхней засыпками из материалов, указанных в техническом проекте.
Анодные заземлители ЭлЖК устанавливают на глубину скважин или траншей соответственно вертикально или горизонтально.
- Перед установкой оценивают целостность изоляции.
- После установки в скважину или траншею пространство засыпают глинистым раствором или коксовой мелочью.
- Присоединяют в фитингах (коверах) кабельные выводы ЭлЖК к магистрали.
При монтаже заземлителей подъем, перемещение или опускание устройств выполняют плавно, потому что заземлители обладают низкими механическими свойствами.
You are welcome to attach any draft documents (a project), if any, to your request.